| Note: |
| 1.
|
Bumper
fascia must be removed and replaced during installation.
|
| 2. |
Some
trimming of bumper needed (fascia, plastic, and/or grill).
|
| 3.
|
Requires
Some Drilling (Not Major).
|
|
4.
|
Requires some trimming of the air dam.
|
| 7. |
Steel
belly pan must be removed and remain off the vehicle after installation.
|
| 9.
|
Tow
hooks must be removed and remain off the vehicle after installation.
|
|
10. |
The
vehicle must have factory tow hooks to mount brackets to.
|
| 11.
|
The
weight of this vehicle is near the 5000 lb class III rating limitations.
Some models, depending on options, may exceed this 5000 lb rating. Be sure
to confirm the weight of your individual vehicle before towing. For 2001
the Aventa II is now rated at 10,000 lbs and should be used for these
applications.
|
| 12. |
Non-24"
spaced attachment tabs. Requires the use of an adapter to utilize a car
mounted tow bar. See the Adapters section of the Accessories. Tow bar
adapters are not to be used with vehicles weighing over 5000 lbs
|
| 13. |
Use
only with motorhome mounted towbars. Removable tabs with only one hole
will not attach to car mount towbars or adapters. Does not apply to the
Blue Ox Acclaim.
|
| 14. |
Due
to a tail light bulb out indicator in wiring system, Jeep Grand Cherokee's
must be wired with a BX8869 wiring kit. The BX8811 wiring kit can not be
used.
|
| 18. |
Downsized
models only. Off road package requires cutting some metal. |
| 42. |
Vehicles
may accumulate miles when flat towing. Consult your vehicle's owner's
manual. |