|
1. |
|
Standard
2-wire system |
|
2. |
|
3-wire system,
requires Converter or ModuLite |
|
3. |
|
T-One
incorporates circuit protected taillight converter |
|
4. |
|
T-One is
equipped with circuit protected ModuLite module |
|
5. |
|
T-One is
equipped with circuit protected ModuLite module; additional installation
time required |
|
6. |
|
ModuLite
required |
|
7. |
|
ModuLite
recommended |
|
8. |
|
2003 Models
built AFTER 11/01/02 |
|
9. |
|
2003 Models
built BEFORE 11/01/02 |
|
10. |
|
Low-side
switching system |
|
11. |
|
T-One is
equipped with ModuLite module |
|
12. |
|
3-wire system
with OEM standard 2-wire harness |
|
13. |
|
T-One
incorporates taillight converter |
|
14. |
|
Per Dodge
owner's manual: If trailer is equipped with more than standard lighting [1
taillight per side], use a ModuLite Adapter in addition to the T-One |
|
15. |
|
T-One is
equipped with ModuLite Luite module, additional installation time required |
|
16. |
|
Some early
production 1994 models may require #18348 |
|
17. |
|
Some models
may require use of a ModuLite adapter in addition to the T-One |
|
18. |
|
T-One
incorporated low-side switching taillight converter, additional installation
time required |
|
19. |
|
Multiplex
Wiring System. DO NOT install converter products with relays on this vehicle |
|
20. |
|
DO NOT cut or
splice vehicle wiring. ONLY use approved T-One or see auto dealer for
trailer towing wiring kit |
|
21. |
|
For vehicle
equipped with factory tow package, may require additional components or may
be used was a replacement harness |
|
22. |
|
On some models
it may require an upgraded flasher or ModuLite |
|
|
|
|