| Sway Bar Notes | |
| 01. | Modification may be required. |
| 02. | Welding required. |
| 03. | 1992 to mid-1995 have IPD-style bars w/ rubber bushings. Mid-1995 on have IPD-style bars w/ urethane bushings. |
| 04. | 18,000 lbs. GVWR and under. |
| 05. | Will not fit Newman Motorhomes. |
| 06. | Not for Oshkosh X, V, M or T line chassis (check w/ manufacturer for your model using VIN#). |
| 07. | 1991 and older require factory retro-fit conversion kit. |
| 08. | Note not used. |
| 09. | With autochains and with and without air brake. |
| 10. | Will fit
1992-99 models w/ 4WD. For vehicles w/out factory bar. For Suburban and 4-door Tahoe/Yukon. Not for 2-door models. |
| 11. | Will fit
1999 models. For vehicles w/out factory bar. For Suburban and 4-door Tahoe/Yukon. Not for 2-door models. |
| 12. | For 2000-Up GMC Yukon XL and Chevy Suburban (leaf springs 2500/3500 series) not for "regular" Yukon or Tahoe (coil springs - 1500 Series). |
| 13. | For 2000-Up Chevy/GMC 2500, 2500HD and 3500 models (fits both single and dual rear wheel) pickups. Both gas and Duramax diesel. Will work w/ airbags. |
| 14. | Fits 1980-03 3/4-Ton and 1-Ton Vans. |
| 15. | For 1975-03 Motorhome chassis can be used on heavily loaded 1-Ton vans. |
| 16. | 2003-06
Dodge 4WD pickups 2500 and 3500 models, both single and dual rear wheels. For stock ride height vehicles. May not fit with 5th wheel hitch. |
| 17. | 1996-02 4WD 2500 and 3500 pickups. Not designed for 2WD. |
| 18. | for 1975-91 only. Not for E150 |
| 19. | Fits 1975-06
Motorhomes and emergency vehicles. Will still work on 2005 gas E-Series van cut-aways. |
| 20. | For E-350
DRW (dual rear wheels/cutaways) chassis 1975-03 w/ automatic chains. Not for use on diesel or V-10 models. |
| 21. |
For 1975-03 Ford E350 vans w/out chains. Type 2 ambulance or Class B motorhome. |
| 22. | 1992-06 also fits E-Super Duty, sometimes called E450. This kit has offset endlinks for tie rod clearance. Does not fit E250 or E150. |
| 23. | For the 1988-91 F53 motorhome chassis. Not for 1992 or newer motorhomes. Also the F-450 pickup cab/chassis. 1986-97 to replace factory sway bar if not factory bar, additional parts will be needed (see Ford Dealer). |
| 24. | For 1992 models and newer vans (Type 2 ambulance, Class B motorhome) except Powerstroke diesels and V-10 models. The exhaust is in the way! Kit could be mounted if customer is willing to modify exhaust. |
| 25. | For V-8 chassis and V-10 chassis w/ GVWR of 18,000 lbs. or less. The 4th digit of VIN is L or M. GVWR is found on chassis data plate/sticker. These axle U-bolts are spaced 5" wide by 5.25" front to rear (Dana 80 rear axle). Will work with a tag axle if the driver axle has leaf springs. |
| 26. | For 1998-Up
F53 with V-10 engine and GVWR greater than 18,000 lbs. The 4th digit of VIN is N. GVWR is found on chassis data plate/sticker. U-bolt spacing is 5" by 6.25" front to back (Dana S135 rear axle). Will work with a tag axle if the drive axle has leaf springs. |
| 27. | Will work of the new 6-liter diesel engine for E450 chassis 1997-Up. Mounts to axle same as factory bar and will work with chains. Replaces 1139-137. This bar has vertical forged ends. |
| 28. | For 1999-03 F-250/350 pickup single rear wheels with factory sway bar (both 2WD and 4WD). Replaces factory bar. If no factory bar endlinks will be needed (#590230-00) need 1 per vehicle. Will not fit 2004 of any dual rear wheels. Bar mounts under differential, not over differential like stock sway bar. |
| 29. |
Front sway bar kit for 2000-04 Ford F-250/350 trucks with straight axle (all 4WD models and F-450 w/ front leaf springs and F-550 2WD models). Replaces factory sway bar. Must have factory sway bar. Will not fit 2005-Up with coil spring front suspension. Updated to exclude 1999 models. |
| 30. | Front sway bar kit for 2005-Up Ford F-450/550 4WD trucks with coil spring axle. Replaces factory sway bar. Must have factory sway bar. Will only fit cabin chassis, not for pickups. |
| 31. | Rear sway bar kit replaced factory sway bar. For F350 commercial cab/chassis (only Dana 80 rear end with shock bracket welded to axle). Will not fit pickup. On F450 confrim Dana 80 axle (round axle tubes). If axle tubes are square (Dana 120) use kit #1139-161. |
| 32. | Rear sway bar for 2000-04 F550 cab/chassis. Replaced factory bar. Also fits F-450 w/ Dana 120 axle (square axle tubes). |
| 33. | Rear sway bar for 1999-07 F-250/350 2WD and 4WD pickups with dual rear wheels and factory sway bar. Designed to replace factory sway bar. Not for lifted trucks. |
| 34. | For chassis with true air brakes with air canister on the axle. Some chassis have air assist brakes or air over hydraulic brakes, these are not true air brakes. |
| 35. | Rear sway bar kit for Spartan Verst, air suspension. 1996-Up 1.5” diameter. Will not fit Renegade made by Harney Coach. Leveling jacks are in the way. |
| 36. | For Spartan Verst air suspension. 2004-Up. |
| 37. | Fits Mountain Master M11 Verst Chassis. |
| 38. | For FL series chassis with 8,000lbs front axle and 19.5” rims or 126” wheel height. Normally used on FL50 or FL60 series low profile trucks (most ambulance chassis). This will not work with the new Cat diesel engine introduced in 2000. |
| 39. | For FL50 & FL60 ambulance chassis with Hendrickson air ride rear suspension. Will not work with chains (use 1209-104). |
| 40. | For Freightliner FL50/FL60 chassis with automatic chains. Proven to fit with Onspot. Arms of bar face towards rear of truck for Hendrickson suspension only. |
| 41. | For chassis up to 1998 and some 1999 and newer with long ¾” diameter. U-bolts on rear axle. Have customer or shop measure u-bolt diameter. For chassis with short 7/8” diameter U-bolts (most of 1999-Up) use kit #1209-115. If rear suspension does not have U-bolts, we do not have a kit. |
| 42. | For 2000-Up FL50/FL60 Airliner chassis with Freightliner air suspension 10/12K-15K GVW. If truck has Hendrickson air rear suspension, use #1209-010 or #1209-104 with chains. Bar mounts towards rear of chassis. For use with autochains. Not for Class A motor homes. |
| 43. | For FL series Airliner with Freightliner air suspension. Bar mount towards front of chassis. Not for use with chains. If vehicle is equipped with chains, use #1209-106. |
| 44. | For Freightliner FL70 with Airliner rear suspension. Rear facing bar. |
| 45. | For most 1999-2003 Freightliner XC. This kit is for chassis with short 7/8” diameter bolts on rear axle. NOTE: sometime in 2003 Freightliner suspension changed to a style with No U- bolts. Have customer/shop measure U-bolt diameter. For chassis with ¾” diameter U-bolts (mostly up to 1998) use kit #1209-105. If rear suspension does not have U-bolts (2003-Up) we do not have a kit. |
| 46. | Will not work on chassis with Mercedes Benz engines that have auxiliary cooling package, if standard cooling, it is okay. |
| 47. | Update of kit #1259-106 now fits all years for Rear W22 Workhorse chassis. Also fits W20 chassis. |
| 48. | Fits Chevy 1/2 ton SUV chassis, coilspring only. |
| 49. | Will not fit with auto chains |
| 50. | Only fits vehicles with gas tanks that are rear of the axle. |
| 51. | Currently does not work with Super Hitch |
| 52. | Check to insure there is enough factory ubolt available to accommodate the factory nut, washer and our ½” plate. If there is not enough ubolt the 590050-00 ubolt replacement kit is needed. |
| 53. | If superhitch is installed the 590051-00 bracket kit is needed |
| 54. | For use with Duramax diesel will not fit gas engine. |